3 Axle Flatbed Trailer Technical Specifications
A standard three-axle flatbed semi trailer provides a versatile loading platform for commercial transport operations. Its structural design distributes cargo loads through the main chassis beams, cross-members, axle groups and fifth-wheel connection.
The following specifications represent available engineering configurations. Final dimensions, weights, payload and equipment depend on the customer's operational requirements and applicable regulations.
- Axle Configuration: 3 axles with BPW, SAF or other approved axle options.
- Suspension: Mechanical leaf-spring suspension or pneumatic air suspension.
- Platform Length: 13,600 mm standard flatbed configuration.
- Overall Width: 2,550 mm standard configuration.
- Floor: High-strength steel or hardwood flooring depending on cargo application.
- Chassis: Reinforced welded I-beam construction using S355 structural steel or alternative steel grades according to engineering requirements.
- Payload Capacity: Approximately 25–40 tonnes depending on axle configuration, tare weight, tractor combination and legal operating limits.
- King Pin: 2-inch or 3.5-inch bolt-on king pin options.
- Tyres: 385/65 R22.5 single tyres or 315/80 R22.5 tyre configurations.
- Braking System: WABCO EBS with RSS stability control where specified and applicable.
- Landing Legs: JOST 24-ton landing gear option.
- Rear Protection: Rear underrun protection designed according to applicable UN/ECE requirements.
- Container Equipment: Optional container twist-locks for compatible 20ft and 40ft container arrangements.
- Additional Equipment: Front wall, removable side pillars, lashing points, toolboxes and other cargo-specific accessories.
The suitability of a flatbed trailer for a particular load is determined not only by its nominal payload but also by axle load distribution, fifth-wheel load, cargo positioning, tyre ratings and chassis design. Alura Trailer evaluates these parameters when preparing customer-specific technical configurations.
Reinforced Chassis and Heavy-Duty Platform Engineering
The chassis is one of the most important structural elements of a heavy-duty flatbed trailer. During transport, the main beams and cross-members must withstand bending forces, dynamic road loads, braking forces and variations in cargo distribution.
Alura Trailer flatbed configurations are developed around welded steel structures with reinforced load-bearing areas. The chassis specification can be adjusted according to the intended payload, operating conditions and transport application.
Chassis and Platform Design Features
- Welded longitudinal I-beams for structural support along the trailer platform.
- Transverse cross-members supporting the loading surface and cargo weight.
- Reinforced fifth-wheel connection and king pin mounting area.
- Axle-group mounting structures designed for the selected suspension arrangement.
- Cargo lashing points positioned according to the planned loading application.
- Platform and flooring options selected according to cargo type and loading method.
For customers transporting concentrated loads, including steel products or heavy industrial components, the required reinforcement is evaluated according to the specific cargo arrangement. Nominal payload alone does not establish the suitability of a trailer for concentrated loads.
Flatbed Trailer Applications and Cargo Types
The open-platform design allows the trailer to be loaded from the sides, rear or above, depending on available equipment and cargo characteristics. This makes a flatbed semi trailer suitable for a broad range of industrial and commercial transport applications.
- 20ft and 40ft containers: Compatible container locking arrangements can be specified for container transport.
- Steel coils and steel products: Optional recessed coil well or load-specific support arrangements can be evaluated.
- Construction materials: Steel profiles, prefabricated components, packaged construction products and other suitable building materials.
- Industrial machinery: Equipment and machinery within the trailer's structural and legal load limits, using appropriate loading arrangements.
- Timber and pipes: Long materials transported with suitable side pillars, supports and securing equipment.
- Palletized general cargo: Industrial goods and packaged products requiring a flexible loading platform.
Container twist-locks, coil wells, removable pillars and additional securing systems are configuration options rather than standard equipment on every flatbed trailer. Final equipment is specified according to the customer's cargo requirements.
Custom Flatbed Trailer Configurations and Equipment
Different transport operations require different trailer specifications. Alura Trailer offers customization options for the axle system, suspension, platform arrangement and cargo equipment.
Air Suspension or Mechanical Suspension
Air suspension provides ride-height adjustment capabilities and is commonly selected for road transport applications where ride comfort and load protection are important.
Mechanical leaf-spring suspension offers a different maintenance and operating profile and may be preferred for certain heavy-duty applications or locations where mechanical serviceability is a priority.
The appropriate suspension depends on axle loads, operating conditions, local regulations and customer preferences.
Single Tyres and Twin Tyre Configurations
Flatbed trailers can be configured with single or twin tyre arrangements, subject to axle specifications, load ratings and destination requirements. Tyre selection affects trailer weight, maintenance requirements, axle configuration and operating characteristics.
Optional Loading and Safety Equipment
- Front protection wall.
- Removable side pillars and sockets.
- Container twist-lock arrangements.
- Steel or hardwood platform flooring.
- Additional cargo securing and lashing points.
- Toolboxes and spare wheel carriers.
- Alternative axle and suspension packages.
- Country-specific lighting and safety equipment.
These options allow customers to select a trailer configuration based on actual transport needs, rather than relying on a single fixed specification.
3 Axle Flatbed Trailer Technical Drawing
The following engineering illustration provides a visual reference for the flatbed platform, general chassis geometry and axle arrangement. It can assist customers in reviewing the basic trailer configuration before requesting a detailed project-specific specification.
The drawing is provided as a general technical reference. Actual production dimensions and equipment may vary according to the final approved configuration.
Standard Flatbed vs Extendable Flatbed Trailer
A standard 13.6-metre flatbed semi trailer is suitable for many general cargo and container transport operations. However, some industrial projects require the transportation of materials that exceed standard platform dimensions.
For long cargo applications, Alura Trailer also develops extendable flatbed trailer configurations with telescopic chassis systems. These are separate configurations designed for cargo such as long steel structures, industrial components and oversized project loads.
The correct trailer type depends on cargo length, total weight, load distribution, turning requirements and permitted transport dimensions.
Flatbed Semi Trailers for International Export
Alura Trailer manufactures and supplies flatbed semi trailers from Türkiye for international transport projects. Trailer specifications can be adapted to the destination market, including axle systems, suspension arrangements, braking equipment and required documentation.
European Transport Requirements
For European-market configurations, applicable requirements may include type approval, vehicle identification, braking performance, lighting, underrun protection and other relevant regulatory provisions.
Where the specific trailer type and configuration are covered by the relevant approval, EC-WVTA and Certificate of Conformity (CoC) documentation can be included. Approval availability must be confirmed for the requested vehicle configuration and destination market.
Heavy-Duty Configurations for African Operations
For projects involving longer transport routes, variable road surfaces or demanding cargo requirements, Alura Trailer can evaluate reinforced chassis configurations, mechanical suspension, axle alternatives and practical maintenance equipment.
These configurations are selected according to the actual operating country, road network, cargo weight and maintenance conditions. Not every destination requires the same trailer specification.
Customers looking for regional project examples, transport solutions and equipment information can explore our dedicated Semi Trailer Solutions for Africa section, featuring heavy transport solutions and international project applications.
Trailer Production, Export and Worldwide Delivery
Alura Trailer coordinates manufacturing and international delivery arrangements according to customer orders, destination and transport requirements.
Depending on the trailer dimensions, configuration and shipping route, transport arrangements may include Ro-Ro shipment, road delivery or other suitable sea freight solutions. For multiple-unit orders, transport and stacking feasibility can be evaluated according to the trailer design.
Shipment planning may also include export documentation, loading arrangements and coordination with freight forwarders. Delivery schedules depend on the production configuration and selected shipping method.
See Alura Trailer Deliveries and Completed Projects
For real examples of manufactured trailers, international shipments and completed customer deliveries, visit our Alura Trailer News and Delivery Updates section.
Our project and delivery updates provide additional insight into the trailer configurations supplied for different transport applications and export markets.
How to Specify Your 3 Axle Flatbed Trailer
To prepare a suitable technical configuration and commercial quotation, Alura Trailer recommends providing the following information:
- Country of operation and delivery destination.
- Primary cargo type and loading method.
- Required payload and maximum cargo dimensions.
- Tractor unit model and fifth-wheel arrangement.
- Preferred air or mechanical suspension.
- Single or twin tyre configuration.
- Container locks, side pillars or other accessories.
- Required vehicle approval and documentation.
- Quantity and preferred delivery terms.
These details allow the engineering and commercial teams to evaluate trailer compatibility, technical equipment, production requirements and delivery options.
Alura Trailer provides customized 3 axle flatbed semi trailer solutions for industrial transport, general cargo and international logistics applications.
Technical Information & Request a Quote
Review our product catalogue or contact Alura Trailer for a detailed technical specification and quotation based on your transport requirements.
3 Axle Flatbed Trailer Video
Watch the Alura Trailer flatbed semi trailer video for a closer look at the platform design, chassis arrangement and trailer configuration.