Heavy-duty transport solutions engineered for global logistics, industrial operations and specialized projects.
3 axles lowbed trailers are designed for construction machinery, industrial equipment and heavy cargo transport with low loading height, hydraulic ramps and heavy-duty chassis construction.
A 3 axles lowbed trailer is one of the most practical semi trailer configurations for transporting construction machinery, industrial equipment, agricultural machinery and other heavy cargo requiring a low loading platform.
The combination of a reinforced chassis, three-axle running gear and low deck height provides a balanced solution for payload capacity, road stability and maneuverability. Depending on the transport requirements, different ramp systems, axle arrangements, platform dimensions and optional equipment can be integrated into the trailer design.
The main purpose of a 3 axles lowbed trailer is to provide a strong, stable and practical transportation platform for machinery and equipment that cannot be efficiently transported on conventional flatbed trailers.
Excavators, wheel loaders, backhoe loaders, drilling machines, road construction equipment and various industrial machines can be loaded onto the low platform with the help of rear ramps.
The reduced deck height helps keep the total transport height under control, which is particularly important when transporting tall machinery and oversized equipment.
The chassis is one of the most important structural elements of any lowbed trailer. A properly engineered chassis must withstand concentrated machinery loads, dynamic road forces and repeated loading cycles during long-term commercial operation.
Alura Trailer lowbed semi trailers are manufactured with heavy-duty steel chassis structures designed according to the required payload, axle configuration and transport application.
Chassis geometry, cross-member arrangement and reinforcement sections can be adapted according to the machinery that will be transported and the operating conditions of the trailer.
The 3 axle lowbed configuration provides a practical balance between payload capacity, maneuverability and overall trailer weight.
Depending on the required specification, the trailer can be equipped with different axle arrangements, including fixed axles, lift axles and self-steering axles. The axle configuration can be selected according to legal axle loads, operating conditions and customer requirements.
A self-steering rear axle can improve maneuverability and reduce tyre scrubbing during tight turns, while a lift axle may reduce rolling resistance and tyre wear when the trailer is operating without a full load.
Hydraulic rear ramps provide practical loading access for tracked and wheeled machinery. The ramp dimensions, loading angle and surface design can be adapted according to the type of equipment that will regularly be transported.
Different ramp configurations can be manufactured depending on operational requirements, including wider ramps, longer ramps and hydraulically adjustable ramp systems.
For machinery with different track widths or wheel arrangements, the ramp positioning and dimensions can be engineered according to the customer's specific loading requirements.
One of the main advantages of a lowbed semi trailer is its reduced platform height. A lower deck helps minimize the overall transport height when carrying excavators, loaders and other tall machinery.
This makes lowbed trailers particularly suitable for operations where bridge clearances, road infrastructure and overall transport dimensions must be carefully considered.
The technical drawing below shows a general layout of a 3 axles lowbed trailer, including the platform geometry, axle arrangement and overall loading configuration.
The dimensions shown in a technical drawing can be modified according to the required payload, machinery dimensions, tractor configuration and local transport regulations.
A 3 axles lowbed trailer can be configured with different equipment depending on the transport operation and customer requirements.
Not every heavy transport operation requires the same trailer specification. For this reason, lowbed trailers can be engineered according to the machinery, payload requirement, road regulations and operating environment of the customer.
Deck length, platform width, axle spacing, ramp dimensions, steering configuration, tyre size and additional equipment can all be adapted during the technical design stage.
This flexibility allows transport companies to select a trailer configuration that matches their regular machinery fleet instead of using a standardized design that may not be suitable for every operation.
Alura Trailer manufactures 3 axles lowbed semi trailers for construction, industrial, machinery transport and specialized logistics operations.
Different lowbed configurations can be produced depending on required payload, loading height, axle arrangement, ramp system and operating conditions. From standard machinery transport trailers to customized heavy-duty solutions, each trailer can be engineered according to the customer's technical requirements.
Alura Trailer manufactures semi trailers for European and international markets, including lowbed trailers, flatbed trailers, extendable trailers and specialized heavy transport solutions.
Trailer configurations can include WABCO braking systems, certified axle brands and high-strength steel chassis, depending on customer specifications and homologation requirements.
Explore Full Product RangeAlura Trailer manufactures custom lowbed semi trailers for construction machinery, industrial equipment and heavy transport operations.
3 Axles • Hydraulic Rear Ramps • Low Loading Platform • Custom Configurations
Contact Us for Pricing
